C2 Contour Drill Brochure

Public / Brochures

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

1. PRINTED IN CANADA 0111.0111.1500 CORPORATE OFFICE & TRAINING CENTRE - 2131 Airport Drive, Saskatoon, SK Canada S7L 7E1 Telephone: 306.933.8585 Fax: 306.933.8626 www.morris-industries.com Questions? email: info@morris-industries.com The policy of MORRIS INDUSTRIES LTD. is one of continuing improvement; therefore, the company reserves the right to change specifications without notice. Optional mud guards reduce soil build-up on double shoot openers. Optional air hose grommets for double shoot openers prevent straw and debris from falling into the top of the opener ports. An enclosed shield and seal protects the hub bearings from mud and debris. Narrow transport models in 25 feet and 31 feet widths. This is an ideal option for front wheel assist tractors in the 200 horsepower range. C2 CONTOUR Independent Opener Drill www.morris-industries.com Morris C2 Contour Drill Specifications and Options Base Size 3 Frame Models 5 Frame Models 25’ (7.62 m) 31’ (9.45 m) 41’ (12.5 m) 51’ (15.54 m) 61’ (18.59 m) 71’ (21.64 m) 80’ (24.38 m) 86’ (26.21 m) 90’ (27.43 m) Weight - 10” Spacing 25.4 cm Spacing 14,738 lb 6,685 kg 16,025 lb 7,269 kg 20,928 lb 9,470 kg 24,622 lb 11,168 kg 31,392 lb 14,239 kg 35,441 lb 16,109kg NA NA NA NA NA NA - 12” Spacing 30.5 cm Spacing 13,933 lb 6,320 kg 15,155 lb 6,874 kg 19,572 lb 8,856 kg 23,137 lb 10,495 kg 29,358 lb 13,317 kg 33,264 lb 15,120 kg 38,140 lb 17,300 kg 41,000 lb 18,600 kg 43,000 lb 19,505 kg Working Width - 10” (25.4 cm) Spacing - 12” (30.5 cm) Spacing 25’ (7.62m) 25’ (7.62m) 30’ (9.14m) 31’ (9.45m) 41.67’ (12.7m) 41’ (12.5m) 50’ (15.24m) 51’ (15.54m) 60’ (18.29m) 61’ (18.59m) 70’ (21.34m) 71’ (21.64m) NA 80’ (24.38m) NA 86’ (26.21 m) NA 90’ (27.43 m) Number of Shanks - 10” (25.4 cm) Spacing - 12” (30.5 cm) Spacing 30 25 36 31 50 41 60 51 72 61 84 71 NA 80 NA 86 NA 90 Frame Width - Main - Wing Inner - Wing Outer 5’ (1.524m) 10’ (3.048m) N/A 5’ (1.524m) 13’ (3.962m) N/A 16’ (4.88m) 12’ (3.66m) N/A 16’ (4.88m) 17.5’ (5.334m) N/A 16’ (4.88m) 12’ (3.66m) 10’ (3.05m) 16’ (4.88m) 15’ (4.57m) 12’ (3.66m) 21’ ( 6.40m) 15’ (4.57m) 14.45 (4.4m) 21’ ( 6.40m) 15’ (4.57m) 17.75’ (5.41m) 21’ ( 6.40m) 15’ (4.57m) 18.92’ (5.77m) Transport Position - Width - Height - Length 9’ 10” (3m) 13’ 6” (4.12m) 31’ 6” (9.6m) 9’ 10” (3m) 15’ 11”(4.85m) 31’ 6” (9.6m) 20’ 6” (6.25m) 15’ 2” (4.62m) 31’ 6” (9.6m) 20’ 6” (6.25m) 15’ 2” (4.62m) 31’ 6” (9.6m) 20’ 6” (6.25m) 15’ 2” (4.62m) 34’ 10”(10.62m) 20’ 6” (6.25m) 17’ 10” (5.44m) 34’ 10”(10.62m) 25’ (7.62m) 17’ 10” (5.44m) 34’ 10”(10.62m) 25’ (7.62m) 17’ 10” (5.44m) 34’ 10”(10.62m) 25’ (7.62m) 17’ 10” (5.44m) 34’ 10”(10.62m) Tires - Main Frame Wheels (4)12.5Lx15 FI Load Range F (4)12.5Lx15 FI Load Range F (8) 11Lx15 FI Load Range F (8) 11Lx15 FI Load Range F (8) 12.5L x15 FI Load Range F (8) 12.5Lx15 FI Load Range F (8) 16.5x16.1 FI Load Range E (8) 16.5x16.1 FI Load Range E (8) 16.5x16.1 FI Load Range E - Wing Frame Front Castor Wheels Single Castor (2) 12.5SLx15 12 Ply Rating Single Castor (2) 12.5SLx15 12 Ply Rating Dual Castor (4) 11SLx15 12 Ply Rating Dual Castor (4) 11SLx15 12 Ply Rating Dual Castor (8) 12.5SLx15 12 Ply Rating Dual Castor (8) 12.5SLx15 12 Ply Rating Dual Castor (8) 12.5SLx15 12 Ply Rating Dual Castor (8) 12.5SLx15 12 Ply Rating Dual Castor (8) 12.5SLx15 12 Ply Rating - Wing Frame Rear Wheels (1 per wing) (2) 12.5SLx15 12 Ply Rating (1 per wing) (2) 12.5SLx15 12 Ply Rating (1 per wing) (2) 11SLx15 12 Ply Rating (1 per wing) (2) 11SLx15 12 Ply Rating (1 per wing) (4) 12.5SLx15 12 Ply Rating (1 per wing) (4) 12.5SLx15 12 Ply Rating (2 per wing) (8) 12.5SLx15 12 Ply Rating (2 per wing) (8) 12.5SLx15 12 Ply Rating (2 per wing) (8) 12.5SLx15 12 Ply Rating - Optional Main Frame Wheels NA NA NA NA (8) 16.5x16.1 FI Load Range E (8) 16.5x16.1 FI Load Range E NA NA NA Opener - Trip Out Force Minimum 300 lbs at 450 psi (3102 kPa) to Maximum 700 lbs (317 kg) at 1200 psi (8274 kPa) - Packing Force 80 lbs to 200 lbs (36 kg - 91 kg) - Packer Wheel 4.50” x 16” Semi Pneumatic Otico tire 4.80” x 16” Semi Pneumatic or Pneumatic 5.50” x 16” Semi Pneumatic Otico tire 5.50” x 16” Semi-Pneumatic 4.00” x 16” “V” Crown Opener to Ground Clearance 12” (30.5 cm) Frame to Ground Clearance 32” (81 cm) Frame Depth 94” (238.8 cm) center to center Rank to Rank Spacing 47” (119.4 cm) center to center Number of Ranks 3 Rows Shank to Shank Spacing 30” (76.2 cm) on 10” (25.4 cm) Spacing 36” (91.4 cm) on 12” (30.5 cm) Spacing Weight Kit Optional Safety Lights Standard Hitch Clevis Standard - Catagory 4 Optional - Catagory 5 Safety Chain Standard Specifications are estimates and subject to change.

2. Pressure is maintained on the opener cylinders through a passive hydraulic system that uses a hydraulic accumulator. This unique hydraulic accumulator system acts as a hydraulic cushion for the trips, and being a passive system, greatly reduces the demand on the tractor hydraulics compared to the continuous flow required by similar drills. By adding or subtracting oil from the accumulator circuit, through a tractor remote, pressure in the accumulator system can be raised or lowered, which provides a corresponding increase or decrease in trip out force and packing pressure. Trip out force can be adjusted from 300 lbs to 700 lbs @ 1200 psi, the opener packing force increases proportionally from 80 lbs to a maximum of 200 lbs. The C2 Contour opener cam is higher and away from the ground so opener adjustments are much easier to make. The notched cam- and-pin system is at 1/4 inch intervals. Rotate the cam by hand and insert the pin to lock in the desired seeding depth. The narrow knife single shoot opener is a single shoot opener that places a narrow 1.25 cm (1/2”) ribbon of seed in each seed row. This opener cuts a smooth narrow channel for seed to be placed, and has the lowest soil disturbance of the openers available. This opener has proven to be a popular choice with growers with sticky, high clay content soils. 1.25 cm (1/2”) seed fertilizer 10 cm (approx. 4” ) 2 cm (3/4”) seed seed fertilizer The paired row double shoot opener places 2 distinct rows of seed 10 cm (4”) apart. Seed is first placed in two distinct rows 5 cm (2”) to each side of the knife followed by a fertilizer band that is placed directly behind the knife and 2 cm (3/4”) below the seedbed. This patented design results in outstanding fertilizer - seed separation and improved seed bed consistency through minimizing soil fracturing. 5 cm (2”) seed fe r tiliz er 2 cm (3/4”) The side band double shoot opener first places a distinct seed row 5 cm (2”) to the side of the knife followed by a fertilizer band which is placed directly behind the knife and 2 cm (3/4”) below the seedbed. This patented design results in outstanding fertilizer - seed separation and improved seed bed consistency by minimizing soil fracturing. 7.6 cm (approx. 3” ) seed fertilizer The spread tip single shoot opener places a 7.6 cm (3”) wide ribbon of seed in each seed row. This opener cuts a smooth level seedbed resulting in very consistent seed placement and has been designed to minimize soil disturbance. The spread tip opener, with its high seed bed utilization is an excellent choice for farmers who apply low to moderate fertilizer rates with the seed. The C2 Contour sheds trash like never before The next generation C2 Contour lets you cut through trash and makes opener adjustments easier. The independent opener features parallel linkage for ultra-precise seed and fertilizer placement. Adjustable packing pressure lets you pull through damp spots. Opener spacing options are 10” and 12”. At the heart of the C2 Contour’s improved ability to shed trash is the design of the single shank. The reclined 12-degree angle moves trash up and off the shank faster. The distance from the ground level to the catch point has been increased to 21 inches on the C2 Contour, greatly reducing the potential for straw bunching. The true one-to-one parallel linkage maintains a constant opener angle relative to the soil and constant opener depth relative to the packer wheel throughout its 17-inch range of travel. The opener can contour up 10 inches and down 7 inches. A double acting hydraulic cylinder raises and lowers the opener from working to transport position. Once set, pressure can be adjusted from the tractor cab on a convenient digital display. A hydraulic valve manifold providing all operator adjustments is conveniently located on the front bar of the drill. Packer wheel options: 5.50” x 16” Semi-Pneumatic, 4.80” x 16” Pneumatic, 4.80” x 16” Semi-Pneumatic, 4.50” x 16” Semi-Pneumatic Otico tire, 5.50” x 16” Semi-Pneumatic Otico tire and 4.00” x 16” “V” Crown.

Views

  • 63 Total Views
  • 43 Website Views
  • 20 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+